Advantages

1. Accurate and reliable for Adhesive, Solvent and Activator mix ratio.

2. Dispense on demand based on consumption.

3. “On the fly” ratio changes

4. Mix container with stir system before going to a transfer tank.

5. Viscosity is checked and modified before transfer to coating unit.

6. Automatic g/m2 calculations, real time during the production run.

7. Production control data reports

Tri-Plex Solvent Adhesive Mixer Dispense Systems: Monitor adhesive coat weight in real time

We monitor the lay down coat weight showing the lbs./ream function, displays a continuous lbs./ream usage of the right amount of adhesive applied to the web. (This is will all our systems)

• Ability to monitor the A & B ratio components accurately.

• Savings in scrap laminated material due to above.

• New Solvent system is unique because we blend the adhesive on demand, because of the short pot live.

LR PRODUCTS BI-2 MIXER AUTOMATIC SOLVENTLESS 
ADHESIVE MIXER with over 800 sold worldwide

• Accurate and reliable

• Monitor the A&B component ratio within set limits. Alarm or shut down automatically

• “On the fly” ratio changes

• Special gear pumps monitor the flow of A&B components

• Automatic g/m2 calculations real time.

• Temperature monitored at three points.

• Production data reports

• Maintenance trouble-free

• Several automatic refilling options

Duplex Adhesive Meter Mix Dispense Systems: Monitor adhesive coat weight in real time

The bi-2 mixer is the most advanced technical solution for solventless adhesive mixing and metering, enabling the highest level of accuracy and quality for the lamination process.

This is achieved by means of the proven lr.products gear pumping technology, controlled by an industrial electronic PLC platform and a proprietary developed software.

AUTOFILL: OPTIONAL AUTOMATIC REFILLING

Increase productivity, no need to refill the mixer by hand, fully automates a previously tedious process.

It prevents the creation of a jelly skin on the surface of the adhesive because there is no moisture inside the component tank. 
The auto-fill works in a completely enclosed environment.

OUTSTANDING FEATURES

1. Unique in the market: calibration function

   1. The calibration function allows the system to calibrate as a function of the adhesive.

   2. Once done, the unit accurately meters the exact amount of each component in weight ratio.In line g/m2 calculation function

2. In line g/m2 calculation function

   1. Once calibrated, the PLC makes a continuous calculation for the g/m2.

   2. A graphic display shows the operator any movement away from the desired amount.

INCLUDED FEATURES

• High accuracy, easy to use and even easier to install

• MAN/AUTO, ‘clean’ and ‘empty tanks’ function

• Variable flow according to consumption

• Alarms and troubleshooting diagnostics

• Reports on consumption, output and g/m2 coating

• Optimum temperature of adhesive maintained prior to production

• Can be installed in any laminator available in the market

• Totally problem free maintenance

• Independent temperature selection

• Double temperature control for higher security

• Permanent level control by means of ultrasonic sensors

• Stainless steel construction

User Friendly Equipment

• Interchangeable static mixer on the mixing

  head

• Adhesive mixing and application just at the

  metering point

• Easy to install at set-up

• Stainless steel removable tanks

• Tool free, easy to clean and manipulate

COMPACT

LOW VOLUME SOLVENTLESS 
ADHESIVE MIXER AND METERING UNIT FOR LAMINATION

• Accurate and reliable

• Production control

• Automatic g/m2 calculations

• “On the fly” ratio changes

• Production data reports

• Maintenance trouble-free

• Several automatic refilling options

Duplex Adhesive Meter Mix Dispense Systems: Monitor adhesive coat weight in real time

• The bi-2 mixer is the most advanced technical solution for solventless adhesive mixing and metering, enabling the highest level of accuracy and quality for the lamination process.

• This is achieved by means of the proven lr.products gear pumping technology, controlled by an industrial electronic PLC platform and a proprietary developed software.

  AUTOFILL: OPTIONAL AUTOMATIC REFILLING

  Increase productivity, no need to refill the mixer by hand, fully automates a pre- viously tedious process.

  It prevents the creation of a jelly skin on the surface of the adhesive because there is no moisture inside the component tank. 
  The auto-fill works in a completely enclosed environment.

SINGLE COMPONENT SOLVENTLESS ADHESIVE

eXCELLENT FOR FILM OR FOIL TO PAPER OR PAPERBOAD

MAIN OPERATIONAL ADVANTAGES

• The remaining adhesive not used in the drum will not deteriorate.

• Possible to interrupt the dosing and the return to dosing.

• Not necessary to clean the equipment during shutdowns.

• Neither the hose nor the metering pump need cleaning.

• Adhesive in the drum is consumed to the maximum, practically without residual waste.

• Drums with dents or blows can be used.

• Suitable for drums with or without internal plastic bag.

• Independent controls for temperature in 4 sectors.

MoDos Mono Adhesive Mixer Dispense Systems: Monitor adhesive coat weight in real time

The modos-200 equipment is the most advanced technical solution for dispensing mono-component adhesives, providing an easy usable and maintenance free operation which were previously unattainable.

This accuracy is achieved by the well known gear pumping technology developed by lr.products and controlled by an industrial PLC running a specific proprietary software.

The lr.products) experience in gear pump technologies, allows the converting industry to have a simple and excellent equipment, with substantial improvements over any equipment based on a heated piston or a meting plate

Main Operational Advantages

• The remaining adhesive not used in the drum will not deteriorate.

• Possible to interrupt the dosing and the return to dosing.

• Not necessary to clean the equipment during shutdowns.

• Neither the hose nor the metering pump need cleaning.

• Adhesive in the drum is consumed to the maximum, practically without residual waste.

• Drums with dents or blows can be used.

• Suitable for drums with or without internal plastic bag.

• Independent controls for temperature in 4 sectors.

Outstanding features

1. Independent temperature control in 4 sectors

   1. Precise adjustment of adhesive temperature

   2. Temperature controls drum, pump, hose and nozzle

   3. Fast heating of adhesive, ~10 minutes

2. Unique in the market: targeted calibration

   1. Function allows to calibrate unit to actual density of adhesive

   2. Equipment reports exactly the amount of supplied adhesive

3. Function of online g/m2 calculation

   1. PLC on the equipment calculates continuously the application of g/m2

   2. Touch-screen graph shows eventual deviation from the desired weight